First evidence for human occupation of a lava tube in Arabia: The archaeology of Umm Jirsan Cave and its surroundings, northern Saudi Arabia.

Recent advances in interdisciplinary archaeological research in Arabia have focused on the evolution and historical development of regional human populations as well as the diverse patterns of cultural change, migration, and adaptations to environmental fluctuations. Obtaining a comprehensive understanding of cultural developments such as the emergence and lifeways of Neolithic groups has been hindered by the limited preservation of stratified archaeological assemblages and organic remains, a common challenge in arid environments. Underground settings like caves and lava tubes, which are prevalent in Arabia but which have seen limited scientific exploration, offer promising opportunities for addressing these issues. Here, we report on an archaeological excavation and a related survey at and around Umm Jirsan lava tube in the Harrat Khaybar, north-western Saudi Arabia. Our results reveal repeated phases of human occupation of the site ranging from at least the Neolithic through to the Chalcolithic/Bronze Age. Pastoralist use of the lava tube and surrounding landscape is attested in rock art and faunal records, suggesting that Umm Jirsan was situated along a pastoral route linking key oases. Isotopic data indicates that herbivores primarily grazed on wild grasses and shrubs rather than being provided with fodder, while humans had a diet consistently high in protein but with increasing consumption of C3 plants through-time, perhaps related to the emergence of oasis agriculture. While underground and naturally sheltered localities are globally prominent in archaeology and Quaternary science, our work represents the first such combined records for Saudi Arabia and highlight the potential for interdisciplinary studies in caves and lava tubes.

Two new Later Stone Age sites from the Final Pleistocene in the Falémé Valley, eastern Senegal.

The understanding of cultural dynamics at work at the end of the Final Pleistocene in West Africa suffers from a significant lack of excavated and dated sites, particularly in the Sahelian and Sudanian ecozones. While the Later Stone Age shows varied behavioral developments in different parts of the continent, the chrono-cultural framework of this period remains largely unknown in West Africa. We report on archaeological, geomorphological, and chronological research on two Final Pleistocene Later Stone Age sites in the Falémé Valley, eastern Senegal. Optically stimulated luminescence ages place the site of Toumboura I-2017 between 17 ± 1 and 16 ± 1 ka and the Ravin de Sansandé site between 13 ± 1 ka and 12 ± 1.1 ka. The excavated lithics show typical Later Stone Age industries, characterized by chaînes opératoires of core reduction mainly producing flakes and bladelets as well as blades and laminar flakes. Segments dominate the toolkits but a few backed bladelets and end-scrapers on flake blanks were recognized. Local raw materials were used, with a preference for chert and quartz, as well as greywacke. These Later Stone Age lithic assemblages are the oldest known in Senegal so far and add to the small number of sites known in West Africa for this period, which are mainly located farther south, in sub-tropical ecozones. The Later Stone Age sites of the Falémé Valley are contemporaneous with typical Middle Stone Age technologies in Senegal dated to at least the Pleistocene/Holocene transition. Our results thus provide new archaeological evidence highlighting the complex cultural processes at work during the Final Pleistocene in West Africa.

Late shellmound occupation in southern Brazil: A multi-proxy study of the Galheta IV archaeological site.

Brazilian coastal archaeology is renowned for its numerous and large shellmounds (sambaquis), which had been continuously occupied from at least 8000 to 1000 years cal BP. However, changes in their structure and material culture in the late Holocene have led to different hypotheses concerning their ecological and cultural changes. The archaeological site Galheta IV (ca. 1300 to 500 years cal BP) offers new insights into the complexity of the late coastal occupation in southern Brazil. Our attempt was to determine whether Galheta IV can be classified as a sambaqui site, or if it belongs to a Southern proto-Jê settlement. Here, we reassessed Galheta's collections and applied a multi-proxy approach using: new 14C dates, zooarchaeology, δ13C and δ15N isotopes in bulk collagen and 87Sr/86Srenamel isotopic ratios from eight human individuals, ceramics analysis, and FTIR. The results indicate an intense exploitation of marine resources, with an area designated for processing animals located at the opposite side of the funerary areas. Bone tools and specific species of animals were found as burial accompaniments. No evidence of human cremations was detected. 87Sr/86Sr results indicate that the eight human individuals always lived on the coast, and did not come from the inland. The pottery analysis confirms the association with Itararé-Taquara, but contrary to what was assumed by previous studies, the pottery seems related to other coastal sites, and not to the highlands. In light of these findings, we propose that Galheta IV can be considered a funerary mound resulting from long and continuous interactions between shellmound and Southern proto-Jê populations. This study not only enhances our understanding of the late coastal occupation dynamics in southern Brazil but also underscores its importance in reshaping current interpretations of shellmound cultural changes over time.

Unstructured satellite survey detects up to 20% of archaeological sites in coastal valleys of southern Peru.

Satellite survey is widely used for archaeological site discovery, but the efficacy of the method has received little systematic investigation. In this analysis, twelve study participants of different experience levels performed an unstructured remote survey of 197 km2 in the Sama and Moquegua valleys of south central Peru where previous pedestrian surveys recorded 546 archaeological sites. Results indicate an average site discovery rate of 9.3% (0-18%, 95% range). The most experienced participants detect up to 20% (17-22%) of known archaeological sites. These detection rates can be used to derive reliable site frequency estimates on the Andean coast, which can be used in planning and budgeting for field efforts and estimating demographic patterns at large spatial scales that are difficult to achieve through pedestrian survey. More generally, this analysis offers a method for deriving correction terms specific to other parts of the world. Additionally, the results can serve as a baseline for evaluating the effectiveness of emerging artificial intelligence routines for archaeological site detection.

An archaeomagnetic study of the Ishtar Gate, Babylon.

Data from the marriage of paleomagnetism and archaeology (archaeomagnetism) are the backbone of attempts to create geomagnetic field models for ancient times. Paleointensity experimental design has been the focus of intensive efforts and the requirements and shortcomings are increasingly well understood. Some archaeological materials have excellent age control from inscriptions, which can be tied to a given decade or even a specific year in some cases. In this study, we analyzed fired mud bricks used for the construction of the Ishtar Gate, the entrance complex to the ancient city of Babylon in Southern Mesopotamia. We were able to extract reliable intensity data from all three phases of the gate, the earliest of which includes bricks inscribed with the name of King Nebuchadnezzar II (605 to 562 BCE). These results (1) add high quality intensity data to a region relatively unexplored so far (Southern Mesopotamia), (2) contribute to a better understanding of paleosecular variation in this region, and the development of an archaeomagnetic dating reference for one of the key regions in the history of human civilizations; (3) demonstrate the potential of inscribed bricks (glazed and unglazed), a common material in ancient Mesopotamia, to archaeomagnetic studies; and (4) suggest that the gate complex was constructed some time after the Babylonian conquest of Jerusalem, and that there were no substantial chronological gaps in the construction of each consecutive phase. The best fit of our data (averaging 136±2.1 ZAm2) with those of the reference curve (the Levantine Archaeomagnetic Curve) is 569 BCE.

Identification and tentative removal of collagen glue in Palaeolithic worked bone objects: implications for ZooMS and radiocarbon dating.

Collagen glue has been used for nearly two centuries to consolidate bone material, although its prevalence in museum collections is only now becoming visible. Identifying and removing collagen glue is crucial before the execution of any geochemical or molecular analyses. Palaeolithic bone objects from old excavations intended for radiocarbon dating were first analysed using ZooMS (Zooarchaeology by Mass Spectrometry) to identify the animal species, however peaks characteristic of both cattle and whale were discovered. Two extraction methods for ZooMS were tested to identify the authentic animal species of these objects, which revealed that these were originally whale bone objects that had been consolidated with cattle collagen glue. This is the first time animal collagen glue has been identified in archaeological remains with ZooMS, illustrating again the incredible versatility of this technique. Another technique, Fourier Transform Infrared Spectroscopy in Attenuated Total Reflectance mode (FTIR-ATR), was also tested if it could rapidly identify the presence of collagen glue in archaeological bone material, which was not the case. Two other cleaning methods were tested to remove bone glue contamination prior to radiocarbon dating, along with two modified collagen extraction methods for ZooMS. These methods were applied to bone blank samples (FmC = 0.0031 ± 0.0002, (n = 219), 47 336 ± 277 yr BP) that were experimentally consolidated with collagen glue and to the Palaeolithic bone material (ca. 15 000 and 12 000 yr BP). The experimental bone blanks produced excellent 14C ages, suggesting the cleaning methods were successful, however the 14C ages for some of the Palaeolithic material remained too young considering their contextual age, suggesting that the collagen glue contamination had most likely cross-linked to the authentic collagen molecule. More research is needed in order to gain a deeper understanding of the occurrence and elimination of cross-linked collagen-based glues in material from museum collections.

The chronology of Gezer from the end of the late bronze age to iron age II: A meeting point for radiocarbon, archaeology egyptology and the Bible.

The ancient southern Levantine city of Gezer is well-known from Egyptian, Biblical and Assyrian sources, associated with power struggles, conquests, and intriguing tales involving figures such as Milkilu and Amenhotep III, Merneptah, the Philistines, Solomon and his unidentified pharaonic father-in-law, and Shishak / Sheshonq I. Since the identity of Gezer with "Tell Jezer" is quite literally 'set in stone' by some dozen boundary inscriptions, along with impressive Bronze and Iron Age remains, research at this site provides a unique opportunity to compare text and archaeology, as well as bring to light the undocumented everyday lives of the city's inhabitants. In this endeavour, independent scientific dating is crucial for anchoring the remains chronologically. This paper presents the first substantial radiocarbon dataset and Bayesian chronological analysis for Gezer spanning the last part of the Late Bronze Age (LBA; LB IIB) through Iron Age II. The dataset derives from an essentially continuous stratigraphic sequence exposed in recent years by the Tandy expedition along the central-southern edge of the site. The results allow us for the first time to independently determine the site chronology, test the viability (from a chronological perspective) of proposed historical correlations, and contribute to debates on Philistine and Iron Age chronology.

Resilience, innovation and collapse of settlement networks in later Bronze Age Europe: New survey data from the southern Carpathian Basin.

Societies of the later Early to Middle Bronze Age (ca. 2200-1600 BC) in the Carpathian Basin exhibited complex, hierarchical and regionally influential socio-political organisation that came to an abrupt end in the 16th century BC. Considered a collapse by some, this change was characterised by abandonment of virtually all central places / nodes in settlement networks. Until recently, the complexity that characterised the period was believed to have substantially diminished alongside depopulation. This model was reinforced by a combination of the loss of established external networks and low-resolution knowledge of where and how people lived in the first stages of the Late Bronze Age (between 1600 and 1200 BC). We contest the idea of a diminished Late Bronze Age and argue that a fully opposite trajectory can be identified-increased scale, complexity and density in settlement systems and intensification of long-distance networks. We present results of a settlement survey in the southern Pannonian Plain using remote and pedestrian prospection, augmented by small-scale excavations. New absolute dates are used to define the occupational history of sites dating primarily between 1500-1200 BC. We argue that climate change played a substantial role in in the transformation of settlement networks, creating a particular ecological niche enabling societies to thrive. New and specific forms of landscape exploitation developed that were characterised by proximity to wetlands and minor watercourses. In this context, the largest monuments of Bronze Age Europe were created and inhabited. In considering the origins and demise of these megasites and related settlements, we provide a new model for Late Bronze Age societies in the Carpathian Basin and their regional relevance.

The center cannot hold: A Bayesian chronology for the collapse of Tiwanaku.

The timing of Tiwanaku's collapse remains contested. Here we present a generational-scale chronology of Tiwanaku using Bayesian models of 102 radiocarbon dates, including 45 unpublished dates. This chronology tracks four community practices: residing short- vs. long-term, constructing monuments, discarding decorated ceramics, and leaving human burials. Tiwanaku was founded around AD 100 and around AD 600, it became the region's principal destination for migrants. It grew into one of the Andes' first cities and became famous for its decorated ceramics, carved monoliths, and large monuments. Our Bayesian models show that monument building ended ~AD 720 (the median of the ending boundary). Around ~AD 910, burials in tombs ceased as violent deaths began, which we document for the first time in this paper. Ritualized murders are limited to the century leading up to ~AD 1020. Our clearest proxy for social networks breaking down is a precise estimate for the end of permanent residence, ~AD 1010 (970-1050, 95%). This major inflection point was followed by visitors who used the same ceramics until ~AD 1040. Temporary camps lasted until roughly ~AD 1050. These four events suggest a rapid, city-wide collapse at ~AD 1010-1050, lasting just ~20 years (0-70 years, 95%). These results suggest a cascading breakdown of community practices and social networks that were physically anchored at Tiwanaku, though visitors continued to leave informal burials for centuries. This generation-scale chronology suggests that collapse 1) took place well before reduced precipitation, hence this was not a drought-induced societal change and 2) a few resilient communities sustained some traditions at other sites, hence the chronology for the site of Tiwanaku cannot be transposed to all sites with similar material culture.

Large-scale application of palaeoproteomics (Zooarchaeology by Mass Spectrometry; ZooMS) in two Palaeolithic faunal assemblages from China.

The application of Zooarchaeology by Mass Spectrometry (ZooMS) on Pleistocene sites in Europe and northern Asia has resulted in the discovery of important new hominin fossils and has expanded the range of identified fauna. However, no systematic, large-scale application of ZooMS on Palaeolithic sites in East Asia has been attempted thus far. Here, we analyse 866 morphologically non-diagnostic bones from Jinsitai Cave in northeast China and Yumidong Cave in South China, from archaeological horizons dating to 150-10 ka BP. Bones from both sites revealed a high degree of collagen preservation and potentially time-related deamidation patterns, despite being located in very distinct environmental settings. At Jinsitai, we identified 31 camel bones, five of which were radiocarbon dated to 37-20 ka BP. All dated specimens correspond to colder periods of Marine Isotope Stages 3 and 2. We regard the presence of camels at Jinsitai as evidence of wild camels being a megafauna taxon targeted, most likely by early modern humans, during their expansion across northeast Asia. This large-scale application of ZooMS in China highlights the potential of the method for furthering our knowledge of the palaeoanthropological and zooarchaeological records of East Asia.

Applying thermal demagnetization to archaeological materials: A tool for detecting burnt clay and estimating its firing temperature.

Burnt materials are very common in the archaeological record. Their identification and the reconstruction of their firing history are crucial for reliable archaeological interpretations. Commonly used methods are limited in their ability to identify and estimate heating temperatures below ~500°C and cannot reconstruct the orientation in which these materials were burnt. Stepwise thermal demagnetization is widely used in archaeomagnetism, but its use for identifying burnt materials and reconstructing paleotemperatures requires further experimental verification. Here we present an experimental test that has indicated that this method is useful for identifying the firing of mud bricks to 190°C or higher. Application of the method to oriented samples also enables reconstruction of the position in which they cooled down. Our algorithm for interpreting thermal demagnetization results was tested on 49 miniature sun-dried "mud bricks", 46 of which were heated to a range of temperatures between 100°C to 700°C under a controlled magnetic field and three "bricks" which were not heated and used as a control group. The results enabled distinguishing between unheated material and material heated to at least 190°C and accurately recovering the minimum heating temperature of the latter. Fourier-Transform Infrared Spectroscopy (FTIR) on the same materials demonstrated how the two methods complement each other. We implemented the thermal demagnetization method on burnt materials from an Iron Age structure at Tell es-Safi/Gath (central Israel), which led to a revision of the previously published understanding of this archaeological context. We demonstrated that the conflagration occurred within the structure, and not only in its vicinity as previously suggested. We also showed that a previously published hypothesis that bricks were fired in a kiln prior to construction is very unlikely. Finally, we conclude that the destruction of the structure occurred in a single event and not in stages over several decades.

Creating frames of reference for chert exploitation during the Late Pleistocene in Southwesternmost Iberia.

Southwestern Iberia has played a key role in characterizing Late Pleistocene human ecodynamics. Among other aspects of human behavior, chert procurement and management studies in this region have received increasing attention in the past two decades, especially focusing on the sites showing repeated human occupation, such as the case of Vale Boi (Southern Portugal). However, these studies have been very limited in their geographical scope, and mostly focused on brief macroscopic descriptions of the raw materials. To further our knowledge of the relationship between regional availability of raw materials and its impact on human adaptations and mobility, a more detailed approach to characterizing geological sources is needed. This paper characterizes chert raw materials location, diversity, and availability in a geologically well-defined region of southern Portugal - the Algarve. Through macroscopic and petrographic approaches, we provide a detailed characterization of geological chert sources to build a frame of reference for chert exploitation in the region. Our results show that there are four main chert formations in Algarve, and that despite the within-source variability, sufficient differences at macroscopic and petrographic levels are present to allow clear source attribution. These results provide a baseline for raw material studies in archaeological assemblages across southwestern Iberia, that will be essential to further characterize the dynamics of human behavior in some of the most important eco-cultural niches.

Plant, pigment, and bone processing in the Neolithic of northern Arabia-New evidence from Use-wear analysis of grinding tools at Jebel Oraf.

Archaeological sites with surface hearths are a ubiquitous feature across the arid zones of the Arabian interior. At Jebel Oraf, in the Jubbah basin of the Nefud Desert of northern Arabia, numerous grinding stone fragments were found in association with hearths, though the original purpose of these stones was unclear owing to the poor preservation of faunal and botanic remains. Here we describe results from use-wear analysis on five grinding tools at Jebel Oraf, demonstrating that such artefacts were used during the Neolithic for plant processing, bone processing, and pigment production. Grinding stones were often broken up after initial use and fragments were subsequently re-used for alternative purposes, before finally being placed on hearths or discarded. More specifically, plants were ground or prepared and possibly cooked in the hearths, and bones were processed as well. The analyses also highlight the importance of pigment processing at Neolithic sites and provide a link to painted rock art. The frequent use of pigment in the archaeological record suggests that pigment was widely used, and that Neolithic painted art may have been more common than the surviving images suggest.

Artificial cranial deformation in Tiwanaku, Bolivia.

PURPOSE: Herein lies a brief historical review of the practice of artificial cranial deformation (ACD) in Tiwanaku, Bolivia, a pre-Columbian archeological ruin once regarded as one of the most powerful pre-Inca regions whose influence extended into present-day Peru and Chile from 600 to 1000 AD. We describe the history, purpose, and implications of ACD from both a neuroanatomical and cultural perspective. METHODS: A literature review was conducted through PubMed on the history of artificial cranial deformation in South America, concentrating on the Tiwanaku region. The authors searched all available data with no specific time reference, using the mentioned keywords: ACD, neuroanatomical implications of ACD, cultural and social functions of ACD, Tiwanaku society, and Andean civilization. RESULTS: Early Andean civilization was hierarchical and stratified. In Tiwanaku, the practice of ACD served to delineate one's social class, caste, lineage, and vocation. This was especially useful for warriors, who distinguished their fellow combatants from insurgents by differences in their cranial structure. ACD was usually conducted within the first few months of an infant's life before morphogenetic features became permanent. Two popular cranial styles-tabular and annular-were achieved by applying various mechanical apparatus and resulted in several cranial shapes (conical, box-like, flattened, etc.). Neuroanatomically, each deformation technique and the duration for which mechanical stress was applied influenced the solidification of cranial bones and shaped the frontal, occipital, parietal, and temporal bones differently. Cognitive deficits and plagiocephalic defects were recorded in limitation and may have been overlooked as the era's occupational demands were more labor-intensive than knowledge-driven. CONCLUSION: In Tiwanaku, the custom of ACD was used to demonstrate group identity, with alterations of the cranial shape corresponding to a particular headdress. ACD was used to distinguish an individual's social identity, separating different groups of society into castes, classes, and slaves (Brain, 1979). The custom has also been used to mark territory and emphasize ethnic differences among groups, with potential cognitive implications that were largely unrecorded.

Revealing the secrets of a 2900-year-old clay brick, discovering a time capsule of ancient DNA.

The recent development of techniques to sequence ancient DNA has provided valuable insights into the civilisations that came before us. However, the full potential of these methods has yet to be realised. We extracted ancient DNA from a recently exposed fracture surface of a clay brick deriving from the palace of king Ashurnasirpal II (883-859 BCE) in Nimrud, Iraq. We detected 34 unique taxonomic groups of plants. With this research we have made the pioneering discovery that ancient DNA, effectively protected from contamination inside a mass of clay, can successfully be extracted from a 2900-year-old clay brick. We encourage future research into this subject, as the scientific prospects for this approach are substantial, potentially leading to a deeper understanding of ancient and lost civilisations.

A 36,200-year-old carving from Grotte des Gorges, Amange, Jura, France.

The earliest European carvings, made of mammoth ivory, depict animals, humans, and anthropomorphs. They are found at Early Aurignacian sites of the Swabian Jura in Germany. Despite the wide geographical spread of the Aurignacian across Europe, these carvings have no contemporaneous counterparts. Here, we document a small, intriguing object, that sheds light on this uniqueness. Found at the Grotte des Gorges (Jura, France), in a layer sandwiched between Aurignacian contexts and dated to c. 36.2 ka, the object bears traces of anthropogenic modifications indicating intentional carving. Microtomographic, microscopic, three-dimensional roughness and residues analyses reveal the carving is a fragment of a large ammonite, which was modified to represent a caniformia head decorated with notches and probably transported for long time in a container stained with ochre. While achieving Swabian Jura-like miniaturization, the Grotte des Gorges specimen displays original features, indicating the craftsman emulated ivory carvings while introducing significant technical, thematic, and stylistic innovations. This finding suggests a low degree of cultural connectivity between Early Aurignacian hunter-gatherer groups in the production of their symbolic material culture. The pattern conforms to the existence of cultural boundaries limiting the transmission of symbolic practices while leaving space for the emergence of original regional expressions.

An ultrasensitive MXene-based electrochemical immunosensor for the detection and species identification of archaeological silk microtraces.

The origin and dissemination of silk have been hotly debated in the field of archaeology, and the key to resolving this controversy lies in the detection and species identification of ancient silk microtraces. Herein, a taxonomically specific anti-fibroin monoclonal antibody was successfully prepared and a layer-by-layer self assembly electrochemical immunosensor was innovatively proposed for detecting silk traces based on flexible carbon cloth. The immunosensor possessed a broad linear range of 10-2-103 ng mL-1 and a detection limit of 2.15 pg mL-1 for the ultrasensitive detection of Bombyx mori silk traces. In addition, the elaborate immunosensor exhibited satisfactory high specificity, storage stability and reproducibility. In particular, the qualitative and quantitative performance of the immunosensor was excellent in the analysis of archaeological samples. Therefore, this work demonstrates that the proposed method not only provides a reliable analytical tool for exploring the origin and spread of archaeological silk, but also improves our understanding of how to use emerging materials like two-dimensional titanium carbide to creat innovative biosensors.

Evaluation of the efficacy of micro-Magnetic Resonance Imaging compared with light microscopy to investigate the anatomy of modern and ancient waterlogged wood.

Light microscopy is the conventional method used to investigate wood anatomy, identify the wood taxon, and assess its conservation state. It generally requires the mechanical cut of thin sections from a sample to obtain informative images. When dealing with wooden artworks or ancient remains (e.g., archaeological waterlogged wood), it is important to avoid sample destruction. In this work the efficacy of micro-magnetic resonance imaging (µ-MRI) to investigate the anatomy of waterlogged wood is assessed in comparison with light microscopy. Images along the three anatomical directions (transverse, tangential and radial) of six modern wood species and one archaeological specimen of waterlogged wood (from the Neolithic site "La Marmotta") were obtained both by µ-MRI and light microscopy. µ-MRI images were acquired virtually selecting 2D slices along the three wood anatomical directions. A 3D reconstruction was derived from 2D µ-MRI images. Conventional light microscopy histology was obtained by manually cutting thin sections. To the best of our knowledge, this is the first study in which high-resolution MR images and light microscopy images of the three anatomical directions of seven wood species are compared. The non-destructive µ-MRI approach allows to investigate the 2D and 3D topological organization of the whole waterlogged wood sample up to a resolution of 8 µm. Although the optical microscope attains higher image resolutions and remains superior in the observation of wood diagnostic characters, multi-parametric µ-MRI provides physiological investigation complementary to light microscopy, giving information concerning both a single section and the whole volume of the sample. The presented study may represent a starting point for further improvements of µ-MRI techniques applied to the non-destructive investigation of waterlogged wood samples, especially those of interest for cultural heritage.

Reconstructing archaeological palaeolandscapes using geophysical and geomatic survey techniques: An example from Red Lily Lagoon, Arnhem Land, Australia.

Arnhem Land is a key region for understanding the Pleistocene colonisation of Australia, due to the presence of the oldest sites in the continent. Despite this, conventional archaeological survey has not been effective at locating additional pre-Holocene sites in the region due to a complex distribution of geomorphic units caused by sea level rise and coastal aggradation. This research uses geophysical and geomatic techniques to map the subsurface distribution of the geomorphic units in the Red Lily Lagoon region in eastern Arnhem Land. This reveals a complex Pleistocene landscape, which offers the potential to locate additional archaeological sites and so reveal more about the lifeways of the earliest Australians.